Demanding your manufacturing or process applications, Metronik distributor of GE Energy Industrial Solutions for Slovenia since 1996 has the resources to provide truly effective product technology solutions:

Industrial Components

Moulded Case Circuit Breaker (MCCB) - Record plus

The "Record Plus" family of circuit breakers has been developed as a line of aesthetically and technically coordinated protection devices for LV distribution and control applications.

Air Circuit Breaker (ACB)

EntelliGuard™G Power Circuit Breakers are a new line of Air Circuit Breakers that have evolved from the existing M-PACT & ME07 types to offer a truly global product platform meeting IEC, ANSI and UL standards available from 400 to 6400A in three basic envelopes with fault interruption ratings of up to 150kA. The design offers a unique combination of High Fault current withstand ratings, fast fault interruption times and selectivity.

Control & Automation

Contactors

A wide range of AC, DC and Electronic coil control voltages:

• Minicontactors - Series M
• Industrial contactors - Series CL and CK
• Capacitor switching contactors - Series CSC

Overloads

These devices operate on the principle of monitoring the current in a motor starter circuit which, when the current exceeds a pre set condition, or there is a loss of current in any phase, the device will initiate a trip circuit which in turn causes the power to the starter (contactor) to be disconnected thus making the circuit safe.

Product features and benefits:

• Low power consumption: Saving space into cabinet,
• Great accuracy: Better motor protection,
• Full reliability: Low risk to burn motor,
• Phase unbalance protection: Better motor protection and current control,
• Direct fitting to contactors Series CL: Compact starter,
• Interchangeable with thermal overload relay: No need to redesign existing cabinet,
• Multiple trip class selection: One device cover for start time motor,
• Manual / Auto reset: One device for two solutions.

Plug-in Relays - Series PRC

• Three basic mounting configurations, plug-in fast-on or solder mounting, printed circuit board solder mounting and plug-in 8, 11 or 14 pin relays,
• Contact combinations from 2 to 4 pole changeover,
• Control circuit voltages AC or DC from 6V to 240V,
• Relays are 6, 10 and 12 amp rated,
• Status indication either mechanical or LED or both,
• Sockets for 35mm DIN rail mounting.

Motor Protection Devices

• Surion, a complete range of compact and reliable manual motor starters rated from 0,1A to 63A in two different frame sizes (45 and 55mm width). It represents a new motor protection system for switching and protecting three phase induction motors up to 30kW @ 400V AC with current ratings up to 63A.

 

• SFK 0 is a compact and reliable manual motor starters rated from 0.1A to 25A in one frame sizes (45mm width). It represents thermal a magnetic protection of AC and DC system for three phase induction motors up to 12.5kW @ 400V AC with current ratings up to 25A. Conforms to IEC947 and VDE standards.

Motor Starters

• Solid soft starter for standard 3ph AC motors up to 30kW at 400V AC,
• Voltage ratings up to 600V,
• Two phase control with integral by-pass,
• Compact, small case,
• DIN rail mounting. Optional from 31A,
• Start and soft stop features.

Control and Signaling Units

The P9 line offers three types of operators:

• Round in satin chrome,
• Round in engineering thermoplastic,
• square in engineering thermoplastic.

 

Controlling and signaling units 30mm - Series 077:

• Industrial heavy duty chrome operating and signaling devices,
• Wide range of opaque and illuminated operating and signaling devices in a wide variety of colors,
• Wide choice of contact blocks and light source options available,
• High brightness mono LEDs in blue, red, green, yellow and white colors.

 

Foot Switches / Safety Foot switches - Series IP

• Foot switches, for intensive services suitable for controlling and monitoring of low voltage AC and DC electrical circuits.

Main Switches

• Ratings 25 - 125A three and four pole,
• Comply with IEC 947-3 AC23 utilization category,
• Disconnecting electrical equipment from the main,
• Visible indication of contacts status (when operation handle is in the 'OFF' position all contacts are open),
• Red/Yellow emergency stop operating handle,
• Handles padlock able in the 'OFF' position,
• Front and rear mounting options,
• Special emergency stop switches with under voltage release available,
• Enclosed versions available.

Limit Switches and Pressure Switches

LIMIT SWITCHES

• Metal and Plastic body types to EN50041 and EN50047,
• Normally closed contacts are positive opening,
• High degree of ingress protection,
• Wide choice of operating heads,
• Pull wire rope switches available with and without latching features.

PRESSURE SWITCHES

• Switches designed for transforming a pressure variation into an electrical signal when a pre-set pressure value is reached.

Two versions available:

• With bellows sensing element for pressures ranging between 0.002 Mpa (0.02 bar) minimum and 2.1 Mpa (21 bar) maximum,
• With piston sensing element for pressures ranging between 0.95 Mpa (9.5 bar) minimum and 37.25 Mpa (372.5 bar) maximum.

Home & Building Solutions

Miniature Circuit Breaker (MCB)

MCB's are capable of breaking any overcurrent up to and including the prospective short-circuit current at the point where the device is installed.

Residual Current Circuit Breakers - RCBB'sSeries BP/BD

People protection against the risk of electrocution and property protection against the risk of an electrical fire.

• In accordance with IEC 61008,
• Additional protection for people (up to 10/30mA) and property (above 30mA),
• Ratings 16A,25A,40A,63A,80A and 100A,
• 30mA,100mA,300mA, 500mA and 1000mA sensitivity options,
• 2P 2Module, 4P 4Module,
• High resistance to nuisance tripping,
• Type AC, A, S or types Ai and Si,
• Can be fitted with auxiliary contacts.

Residual Current Circuit Breakers – RCBO

People protection against the risk of electrocution and property protection against the risk of an electrical fire.

• Series DM60,
• In accordance with IEC 61009,
• 6kA fault rating,
• Supplementary protection for people (up to 10/30mA) and property (above 30mA),
• Type AC or type A,
• Ratings 6A, 10A, 16A, 20A, 25A, 32A, 40A,
• 10mA, 30mA, 100mA and 300mA sensitivity options,
• Type B and C tripping characteristics,
• 2Module, 1P+N isolates both live and neutral,
• Advanced design requires no earth le.

Modular Control Devices

• Switches Aster,
• Contactors Contax,
• Relays Contax R,
• Impulse Switches,
• Staircase Switches,
• Time Relays,
• Analogue Time Switches Digital Time Switches,
• 72x72 Time Switches,
• Light Sensitive Switches,
• Transformers,
• Measurement Devices,
• Priority Relays,
• Surge Arresters.

Residential Enclosures

GE C&I offers a wide range of surface mounted or flush mounted enclosures for power distribution purposes in the house building industry, offices, hotels, ...

System and Equipment

GE has a complete range of systems and equipment which combine high perfomance with superior reliability and safety, enabling tailored solutions for all requirements.

Modula plus:

• A range of floor standing enclosures, busbar systems and functional units prepared to mount LV devices.
• Offered in kit form, designed for low voltage distribution boards up to 4000A.
• Cabinets are offered in 500mm & 700mm depths, in 650mm & 900mm widths. All cubicles are 2000mm high.
• Type tested conforms to EN 60439-1.