Solstart
Solstart is a miniature, two phase control, electronic Soft Starter with an internal bypass. A Soft Stop feature can be enabled by adjusting the setting on the Ramp-Down potentiometer.
- Range 8-170A, 220-600V
- Built-in bypass
- Soft start & Soft stop
- Start / Stop with voltage free contact
- End of Acceleration contact
- Compact foot print
- DIN Rail mounting
Solstart Plus
Solstart Plus is miniature two phase control electronic Soft Starter. The SolstartPlus incorporates a built in overload, phase loss and under voltage.
- Range 31-170A, 220-600V
- Built-in motor protection
- Built-in bypass
- Two phase control
- Soft start & Soft stop
- Adjustable current limiter
- End of acceleration relay
- Fault relay
- Compact foot print
- Aluminum case
- DIN Rail mounting
RVS-AX
The RVS-AX is an easy to use electronic three phase control Soft Starter including an internal by pass. The RVS-AX incorporates built in motor protection. Control voltage is not required to operate the RVS-AX.- Range 8-170A, 220-600V
- Built-in motor protection
- Built-in bypass (31-170A)
- Soft start & Soft stop
- Current limit
- Start / Stop with voltage free contact
RVS-DX
- Range 8-1100A, 220-600V (690V above 390A)
- Internal bypass for the whole range
- Pump control
- Large ,clear, two line, multilanguage digital display
- Advance starting ;& stopping characteristics
- Comprehensive motor protection package
- Communication: Modbus, Profibus, Devicenet
- Frequency auto tracking 45-65Hz
- User friendly set up and operation
- Line or Inside delta connection
- Analog output
RVS-DN
The RVS-DN is a severe duty, advanced, highly reliable Soft Starter. Designed to operate in the most severe applications such as Marine and Mining. It offers the widest range of low voltage power, starting from 8A up to 3000A. The fourth generation, microprocessor based digital control has advanced features such as pump control, slow speed, electronic reversing and enhanced motor protection.
- Range 8-3000A, 220-1200V (1200V up to 820A)
- Severe duty
- Robust construction
- Highly advanced starting & stopping characteristics
- Comprehensive motor protection package
- User friendly set up and operation
- Line or Inside delta connection
- Ambient operating temperature: up to 60°C
- Motor Insulation Tester
- Communication: Modbus, Profibus, Devicenet
- Thermistor input
- Analog output
RVS-DN 1000V in 1200V
Robust, Full Featured, Motor Protection Enchanced, microprocessor-Based, for motors 105-820A, 150-900KW.
- Eliminates high inrush current and damaging mechanical shock
- Third generation microprocessor circuitry
- Heavy duty design: 50°C ambient temperature
- Soft, smooth, stepless acceleration & deceleration
- Reduced inrush current & mechanical shock
- Power factor capacitors can be connected directly to the upstream contactor
- Unique starting & stopping characteristics
- Sophisticated motor protection package
- User friendly, easy installation and operation
- RS485 Communication with MODBUS, PROFIBUS or MODBUS/TCP protocols (others available on request)
- Wide 45-65Hz Auto-tracking frequency range combining special software with unique hardware arrangement allowing starting and stopping while the frequency variates (designed for Marine, Offshore and Generators operating under continuous frequency variation
- Unique features such as: Pump Control Program, Dual Adjustment, Slow Speed with Electronic Reversing, Energy Save, etc.
- Torque and current starting & stopping characteristics
HRVS-DN
The HRVS-DN Soft Starter was developed to start motors in the most demanding applications. Advance features such as enhanced motor protection, starting curves, unique voltage measurement and many years of field proven reliability makes the HRVS-DN the best choice for starting medium voltage motors.igitalni mehki zagon za srednjo napetost (MV).
- Eliminates high inrush current and high mechanical torque on startup
- Soft, stepless acceleration & deceleration
- Unique starting & stopping characteristics
- User friendly, straight forward set-up and operation
- Sophisticated motor protection package
- Heavy duty design: 50°C ambient temperature
- Innovative low voltage test mode - full function-testing with a small L.V motor, using LV mains
- Advanced Electronic Potential Transformer utilizing Patent Pending "wireless" fiber-optic controlled firing system
- Each starter is tested for Partial Discharge (corona) to ensure long term reliability
- Power factor capacitors can be connected directly to the upstream contactor
- IP30-standard, higher protection by special order
- Two optional methods of delivery: Chassis type for self assembly or Complete system
- RS485 Communication with MODBUS, MODBUS/TCP, PROFIBUS or Device-Net protocols (others available on request)
- Wide 45-65Hz Auto-tracking frequency range realized by special software with unique hardware arrangement (designed for Marine, Offshore and Generators operating under continuous frequency fluctuation)
- Torque and current starting and stopping characteristics>
- Pump control software
- Analog output option
- Motor Insulation Protection option (with programmable alarm and trip levels via seperate additional output)
Solbrake (SMB)
Solbrake – Solid State Motor Brake, provides fast and smooth braking of three phase squirrel cage motors by injecting a controlled DC current to the motor windings. This induces a stationary magnetic field, which exerts a braking torque on the rotor. An intelligent sensing system turns the brake off automatically when the motor comes to a full stop
- Range 8-820A, 208-690V
- Reduces stopping time of high inertia loads
- Adjustable braking time
- Auto stop - DC Injection stops when the motor stops
- DIN Rail mounting
- Easy to install and simple to operate
MPR(C)-6/3
New generation of microprocessor based relay designed to protectthree phase induction motors. Featuring Directional Ground Fault and true RMS line currents are measured at a sampling rate of 0.5 mSec. The MPR-6 includes three temperature (RTD's or Thermistors) inputs, all combined to provide a comprehensive protection package.
- Directional Ground Fault - New for 2003
- Comprehensive package, 26 protective functions
- Ability to select each protective functions as Alarm, Trip, both or none
- True RMS at a scan time of 0.5 mSec
- Full control and supervision through RS 485 with open Modbus protocol
- Compact, simple to install and easy to operate
METRONIK d.o.o., Stegne 9a, 1000 Ljubljana, tel: 01/514-08-00, fax: 01/511-16-35 / made in studioterminal.com